Tel 01904 415 415

Fax 01904 436 540

Cyclops Electronics uses cookies to ensure that we give you the best experience on our website. For optimal performance please accept cookies. For more information please visit our cookies policy.

Accept and close

Component Search

Blog

RSS Feed

Showing posts tagged 'ai'


27 October 2021

Why is chip sovereignty so important?

chip

The US and EU are planning for chip sovereignty, aiming to defend domestic chip supplies and move manufacturing back home.

At first glance this is a tall order, considering most chips are made in China and China controls 55% of rare earth metal production, but it is nether the less crucial to ensure that the Western world has access to the chips it needs.

The need for chip sovereignty

As the electronics industry battles on with chip shortages, we are seeing car plants cut production and companies delay product launches.

These are only a few examples of measures applied like sticky plasters over supply chains that have been bleeding for years.

We are in a situation where electronic components manufacturers are running at 99-100% capacity. Demand has soared for all types of components, from chips and memory to diodes and displays, squeezing supply chains.

Quite simply, demand is outstripping supply.

Many of the problems in the supply chain are geopolitical and logistical in nature, so by moving manufacturing back home, nations like the US and the EU will be able to control the supply chain (or most of it) and make supply meet demand.

What’s happening?

The EU will legislate to push for chip sovereignty with the forthcoming “European Chips Act”. It aims to stop European countries from competing with each other for chips, instead having them work together to compete globally.

The US isn’t legislating for chip sovereignty, but the Biden administration used its first budget proposal to Congress to call for domestic funding to fight semiconductor shortages, with figures up to $50 billion being touted.

The UK is at odds with the US and EU with no chip sovereignty in sight.

Simply put, the UK is selling off chip firms, with $42 billion sold since 2010 (figures from US research). For example, In July, the UK’s largest chip plant was acquired by Nexperia - a Dutch firm wholly owned by Shanghai-based Wingtech.

This raises concerns over the future of UK chip manufacturing. Industry funding is seriously lacking too, putting the UK firmly behind the US and EU.

Companies are a successful case study 

As countries continue to struggle to meet demand for chips, some companies have taken matters into their own hands.

Apple produces their own chip called the M1 for the MacBook Air and iMac, and Google is doing the same with the Tensor chip, used in the Pixel 6 smartphone.

By moving away from Intel and Qualcomm respectively, Apple and Google have taken greater control over their supply chains, cutting out many geopolitical and logistical issues and unlocking greater pricing power.

With the global chip shortage showing no signs of abating and rare earth metal prices soaring, supply chains are only going to get squeezed more in the near future.

Chip sovereignty will be important for nations to meet demand and reduce reliance on China, Taiwan, and other countries a very long way away.

However, while the EU legislates for chip sovereignty, and the Biden administration pushes Congress for domestic chip funding, the UK continues to sell off chip firms to foreign investors. This will bite down hard when chip imports take a hit.

Tags: chip sovereignty china rare earth metal chip shortages chips memory diodes displays supply chain european chips act


13 October 2021

Electronic Component Shortage update

istockphoto-1206098096-612x612

The ongoing electronic component shortage is one of the biggest challenges global supply chains face today, with demand for many components, from chips to actives and passives, well and truly outstripping supply.

A lot has happened in the last month, with new research and analyst insights pointing to when demand might ease (hint: it won’t be this year).

Here’s your latest electronic component shortage update:

Chip lead times hit all-time high

According to Susquehanna Financial Group, chip lead times hit an all-time high of 21-weeks in September, up from 20.2 weeks in August and 18 weeks in July. However, in a research note, Susquehanna analyst Chris Rolland said that while lead times for some chips got worse, lead times for others like power management chips saw relief.

Gartner says global chip shortage will persist until Q2 2022

Gartner predicts the global semiconductor shortage will persist through Q1 2022 but recover to normal levels by the second quarter of 2022. They rate the current shortage as moderate and the shortages of early 2021 as severe.

Chipmakers should brace for 'oversupply' in 2023

Analyst firm IDC predicts that the global chip shortage may well turn into an oversupply situation in 2023, sending prices diving. They say the industry will see normalisation by the middle of 2022, with a potential for overcapacity in 2023.

EU pushes for chip sovereignty

The EU will legislate for chip sovereignty with the forthcoming “European Chips Act”, bringing together the EU’s semiconductor research, design, and testing capabilities, so that EU countries can make demand meet supply as one nation. “Europe cannot and will not lag behind,” the EU said in a statement on the Chips Act.

Ford Europe predicts chip shortages could continue to 2024

In an interview with CNBC, Ford Europe chairman of the management board Gunnar Herrmann estimated the chip shortage could continue through to 2024. Herrmann also revealed a new company crisis in raw materials. “It’s not only semiconductors,” he says, “you find shortages or constraints all over the place.”

Tesla's China output halted on chips shortage

Tesla temporarily halted some output at its Shanghai factory for four days in August due to the chips shortage, shutting part of the production line for electronic control units (ECUs), a small but significant action that cost it millions in revenue.

New forecast says chip shortage to cost car industry $210 billion

The total estimated cost of the chips shortage to the car industry keeps rising, with a new report from AlixPartners predicting a global cost of $210 billion. This is nearly double what their first report predicted in May ($110 billion).

Counterfeit chips penetrating the supply chain

As a result of the chips shortage, some manufacturers are turning to riskier supply channels, leaving themselves vulnerable to counterfeits. As ZDNet reports, this puts low-volume manufacturers whose supply chains are less established at risk.

If you are worried about counterfeits in your supply chain, read our 8 Step Guide To Buying Electronic Components With Confidence and Avoiding Counterfeits.

If you are struggling to find those hard to find and obsolete components. Contact Cyclops Electronics today. Call 01904 415 415, email sales@cyclops-electronics.com or visit our website https://www.cyclops-electronics.com/.

Tags: electronic component shortage global supply chains chip lead times semiconductor shortage chip sovereignty ford tesla alixpartners counterfeit chips


06 October 2021

Rare earth metal prices explode

earth metals]

Prices for rare earth metals have exploded over the last 12 months, moving nearly 50% higher on average since March.

This development could push prices of electronics components higher than ever, as a perfect storm of expensive raw materials + limited production capacity + higher demand = rocketing prices.

As we are seeing with the global semiconductor shortage, fluctuations in supply chains ripple through the electronics industry.

Electronic component shortages have, in part, been caused by reduced mining quota for raw materials including rate earth metals. But the problem now isn’t a lack of mining, but the soaring demand for rare earth metals.

The high price reflects strong demand. Rare earth metals are used in most electronic components and devices, from integrated circuits to displays, vibration motors and storage, so it’s easy to see why demand is so strong. 

For example, materials like neodymium and praseodymium used to make magnets have seen a 73% increase in demand in 2021. Holmium oxide used in sensors, terbium oxide used in displays and cobalt used in batteries have also seen increases.

Why have prices exploded?

China is the only country in the world with a complete supply chain for rare earth metals from mining, to refining, to processing. With over 55% of global production and 85% refining output, the world depends on them for rare earth metals.

In January, Beijing hinted at tightening controls for earth metal exports, triggering panic across the world and sending prices soaring.

For those of you who remember, rare earth prices exploded in 2011 when China’s export volumes collapsed. China cut export quotas of the 17 rare earth metals and raised tariffs on exports, sending prices soaring by more than 50%.

Talk about déjà vu!

Another factor for the price explosion is supply and demand. Even with China’s hints, demand for rare earth metals is outstripping supply. The world is using more electronics than at any time in its history, and rare earth metals are needed to make more of them.

It isn’t only relatively unknown materials like neodymium and praseodymium that are surging in price, but also more commonly known materials like tin, aluminium and copper, which have also surged in price in 2021.

So, in a nutshell, demand for rare earth metals is outstripping supply, and China (which has significant control over rare earth metals) has hinted at tightening exports, sending a shockwave through the supply chain.

The issue is bad and will take time to resolve. The United States is the second biggest producer of rare earth metals, and in February, President Joe Biden announced a review into domestic supply chains for rare earths, medical devices, chips and other resources, with a $30 million initiative to secure new supply chains.

Unfortunately for the world, China’s control of 55% of global production and 85% of refining output for rare earth metals means they control the market. Missteps, problems at home, and hints about tightening controls have already sent rare earth metal prices soaring, and it stands to reason they will continue creeping higher in the near-term. 

Tags: rare earth metals limited production capacity higher demand semiconductor shortage supply chains electronic components


15 September 2021

Chip Shortage causing car manufacturers to cut production levels

photo-1591799264318-7e6ef8ddb7ea

A week doesn’t pass without an announcement from a car manufacturer that they are cutting production levels. Idling shifts and even entire factories has become normal for an industry that thrives on maximising output. 

Volkswagen, Ford, General Motors, Hyundai and Toyota have cut production levels to prioritise their most lucrative models. In some cases, plants have shut down for weeks at a time to allow supply chains to catch up to one another.

To understand how big this is, a 1-2 week plant shutdown will cost a car manufacturer millions of pounds at the very least. No manufacturer would willingly do this, but the global chip shortage is forcing them to.

Chip shortage in numbers

Just 53,438 cars rolled off assembly lines in the UK in July 2021, making it the lowest output in the month of July since 1956.

In June 2021, data from the Society of Motor Manufacturers and Traders (SMMT) showed that car production was down 52.6% on the same month in 2019, telling us that we’re a long way off reaching pre-pandemic levels.

According to research firm AlixPartners, the chip shortage will collectively cost the auto industry $110 billion in revenue in 2021 - a revised figure and an increase of 81.5% over the same firm’s figures in late January.

More telling figures come from Fitch Ratings, who estimate the chip shortage will cost automakers 5% of production. North America and Europe will be the hardest hit, with Asia and China coming in third and fourth respectively.

What’s happening with chips!?

The automotive sector has been hit harder than any other by the chip shortage due to cancelling orders for chips at the start of the pandemic.

Anticipating a slowdown that would last months, most car markers cancelled orders for chips. Semiconductor manufacturers filled order books with orders from companies making smartphones, laptops and other devices.

When the automotive sector bounced back sooner than expected, semiconductor manufacturers had hardly any capacity to meet demand. This has led to the situation today, where car makers can’t secure the inventory they need. 

Now, there are not enough chips, foundries are running at 99% capacity and new foundries take years and billions in investment to set up.

Changing the production line for a chip costs tens of millions and takes months, labour shortages are causing a manpower crisis, and the pandemic is causing short-term factory shutdowns at foundries and fabless plants.

When will the global chip shortage end?

It will take at least five years for the global chip shortage to subside, assuming investment in new foundries begins in 2021/22. New factories are the only the way out of the shortage because demand for chips is only going to increase.

Opinions on when the shortage will end vary from early 2023 to 2025. The last 18 months has tested supply chains and wreaked havoc on production, but the automotive industry is experienced enough to cope with future problems.

When you need to source hard to find electronic components quickly because of allocation, long lead times, obsolescence or quality issues, contact Cyclops Electronics for a fast response to your enquiries and a reliable on time delivery.

Tags: chip shortage car manufacturers volkswagen ford general motors hyundai toyota alixpartners semiconductor foundries pandemic


28 July 2021

What Shortage? How Electronic Component Distributors Make Supply Meet Demand

truck image

When buyers can’t find electronic components, they turn to distributors like us who can source scarce and obsolete parts.

Our experience has been tested to new extremes over the last several months due to the semiconductor and wider electronic components shortage. This shortage was years in the making but has been amplified by COVID-19.

It says everything about the state of the electronic components supply chain when Samsung, who make their own chips, don’t have enough chips. Shortages have affected brands like Samsung, Apple, Volkswagen and Nintendo not just in terms of supply, but also prices, which have skyrocketed in 12 months.

When the chips are down, prices go up.

Distributors are busier than ever

Cyclops Electronics, as well other distributors, have become more essential than ever in supply chains since the COVID-19 pandemic began.

It’s no exaggeration to say distributors like us are keeping many businesses going. We keep production lines going by sourcing scarce parts from around the world - parts that would be impossible to source without excellent connections.

We are seeing desperation from companies that have never experienced supply chain problems. We’re talking about global companies listed publicly.

The situation is so bad for some components that some companies are paying a 100% premium just to secure them. Supply and demand is driving fierce competition and bidding wars are not uncommon.

If these revelations shock you, consider this - the electronics components shortage isn’t expected to abate until late 2021 at least. By then, there should be more order to the chaos, but some industry experts expect it to persist longer.

For example, IBM has said the chip shortage could last 2 years.

A 2 year extension would extend the chip shortage to 2023 at least. This is likely to be the case for other components too, including memory, integrated circuits and display drivers. A huge number of companies will be affected.

Playing a crucial role in the supply chain

Distributors like us are able to source hard-to-procure components because we have rapport with the best suppliers in the industry. In other words, we have immense buying power, and we put this to use for our customers.

Another way we are playing a crucial role in the electronics components supply chain is the reduction of counterfeit components.

Counterfeiters are taking advantage of weakened supply chains, lapse quality control processes and inadequate reporting to flood the market with illegal components. This has affected thousands of buyers and will affect many more.

Our role in this is to deploy anti-counterfeiting technologies including a SENTRY machine, die testing and decapsulation testing to test the components we procure. This ensures the components we supply are genuine parts.

We provide industry-leading chip testing to catch counterfeit parts. We have ISO 9001:2015 certification and ESD qualified staff.

If you need to buy parts and the only way to get them is with a distributor, don’t rush in - make sure your distributor is as equally qualified as us first. If you need help, feel free to call us on 01904 415 415 for a chat with our experts.

Tags: electronic components distributors obsolete parts semiconductor components shortage covid-19 supply chain production supply and demand anti-counterfeiting iso esd qualified


21 July 2021

Perfect storm' creates electronic component shortages

components

A perfect storm has hit the electronic components market, creating supply chain problems that will be felt for several years.

The perfect storm

Even before the COVID-19 pandemic, most electronic component manufacturers were running at 95-98% capacity.

This high demand for electronic components was fuelled by growth in technologies like automation and the Internet of Things - technologies that are only in their infancy now but will mature in the next decade.

This high manufacturing output was felt across all types of components, especially chips (semiconductors, memory) and integrated circuits. It was even difficult to get a hold of some active and passive components in 2019.

Then, in 2020, the COVID-19 pandemic hit. Car manufacturers and other manufacturers affected by shutdowns paused orders for electronic components. Meanwhile, manufacturers benefitting from lockdowns scaled up.

Now, with the development and roll-out of COVID-19 vaccines, industries that shut down have opened up again. But there’s a problem - demand for electronics has not wavered and there isn’t enough manufacturing capacity to serve everyone.

Quite simply, there isn’t enough bread to go around.

Demand is ramping up

We are now in a situation where electronic components manufacturers are running at 99-100% capacity. Demand has soared for all types of components, from chips and memory to diodes and displays. This is squeezing most supply chains.

There are so many contributors to this squeeze. Emerging technologies like AI, automation, virtual reality, augmented reality and machine learning are fuelling demand for smarter chips and data centre modernisation, while technologies like 5G and Wi-Fi 6 are demanding infrastructure rollout, which requires a significant effort.

When it comes to chips, however, cars are the biggest users. Cars can have as many as 22,000 multilayer ceramic capacitors (MLCCs) each. This will increase as cars get smarter (a self-driving taxi sounds great, but it’ll need around 30,000 chips).

Suppliers are slowly adapting

There have been years of under-investment in new foundries and plants. This under-investment has affected manufacturing capacity today.

To their credit, most manufacturers are looking to expand capacity by setting up new foundries or acquiring plants. Trouble is that most plants take years to set up. Some plants that started a build-in in 2017 are still being built.

Staffing is also an issue. The biggest challenge suppliers face is social distancing and COVID prevention policies, which have reduced staff numbers in many factories.

You can’t automate every process in a factory, so it is a given that having limited staff will increase lead times. Some manufacturers have been harder hit than others with this, but all will experience staff shortages during the pandemic.

In addition to this, freight has become more challenging during the pandemic. Things are taking longer to move and there are fewer commercial flights. Global shipping rates have skyrocketed during the pandemic because of this. Higher shipping rates have contributed to price increases for most electronic components.

Weathering the storm

We predicted the electronics component shortage in early 2020 following the UK Government’s national lockdown. We knew supply chains would be squeezed and stretched due to changes in economic output and industry trends.

The best way to weather the storm is to work with us or another reputable electronic components distributor. We focus on delivering outstanding service, with industry-leading quality and dependability. Call us on 01904 415 415 for a chat.

Tags: covid-19 high demand semiconductors car manufacturers demand has soared emerging technologies ai automation virtual reality augmented reality machine learning 5g and wi-fi 6 mlccs


14 July 2021

Active Electronic Components Market Growing Demand

active

Active electronic component demand is soaring. The market is expected to grow by a compound annual growth rate of 4.8% during 2021-2026, fuelled by new technologies and faster and more globally available internet connectivity.

What’s driving it?

An explosion of new products with AI and IoT support and tailwinds like 5G are fuelling demand for active components.

Semiconductor devices, optoelectronic devices, and display technologies are significant applications. Examples include smart home appliances, virtual reality headsets, connected medical devices, and electronic ordering systems.

Here’s a non-exhaustive list of active components in high demand:

  • Diodes
  • Transistors
  • Integrated circuits
  • Optoelectronics
  • Sensors
  • Digital and analogue circuits
  • Batteries and power supplies
  • Generators
  • Vacuum tubes
  • CRT / LCD / VFD / TFT / LED displays

The increasing trends of the Internet of Things (IoT), automation, artificial intelligence, machine learning and virtual/augmented reality are expected to fuel demand for active electronic components for years to come.

Challenges lie ahead

This growing demand is not without its challenges. How will manufacturers get a hold of active electronic components if there isn’t enough to go around? Will geopolitical tensions affect supply? How will COVID-19 play a role in the future?

COVID-19

COVID-19 can create supply chain and market disruption and have a financial impact on firms and financial markets. If the virus persists in causing global disruption, this is likely to cause a shortage of active components in the future.

Geopolitical tensions

The US and China’s trade war in 2020 affected chip supplies around the world. Geopolitical tensions remain a risk in the future. Who knows if certain brands will be banned? It’s important that manufacturers stay in the loop to avoid supply chain problems.

Manufacturing bottlenecks

The world is advancing at a rapid rate and electronics components manufacturers are struggling to keep up. While investment in new factories is ongoing, demand may exceed manufacturing capacity, causing a shortage of components.

Price increases

Inflation is making everything more expensive. Add wildly fluctuating exchange rates and increasing demand for active components and you have the perfect recipe for price increases. This could cause a bidding war.

Active components and the future

The future is filled with more technology than you can imagine. Everything will be connected, including your car to your smartphone and your TV speakers to your smart home assistant (e.g. Alexa). Anything electronic can have a chip these days and you can bet innovators will find a way to make everything smart and connected.

With the active electronic components market predicted to increase in value significantly over the next five years, it is essential that companies have a reliable way to source the active components they need.

This is not a matter of beating the competition but a matter of staying operational amid impending shortages. The current chip shortage is a prime example of what can happen if a perfect storm of industry issues occurs.

If you need to source active electronic components, we can help. Email us if you have any questions or call us on 01904 415 415 for a chat with our team.

Tags: active electronic ai and iot support 5g semiconductor devices optoelectronic devices display technologies covid-19 geopolitical tensions manufacturing bottlenecks price increases


16 June 2021

Government asks for views on supply chain security

component security

The Department for Digital, Culture, Media and Sport (DCMS) has called for views on security measures across digital supply chains and IT services, including data processing, infrastructure management and supplier assurance.

The call comes as more organisations move their operations online and pivot to digital business models. A few obvious examples are retailers moving online and car manufacturers offering cars on subscription, which may kill showroom sales.

As organisations increasingly move their operations online, it’s a given that digital supply chains and third party IT service operators will become more vital. The Government wants to take a leadership role in helping organisations make the transition.

“We’re seeking views from firms that both procure and provide digital services, as a first step in considering whether we need updated guidance or strengthened rules,” said Digital Infrastructure Minister Matt Warman.

Call for Views

The Call for Views focuses on two parts:

Part 1 seeks input on how organisations across the market manage supply chain cyber risk and how government intervention would help.

Part 2 seeks input on the suitability of a proposed framework for Managed Service Provider security and how it can be appropriately implemented.

You can read more about the Call for Views here.

The information submitted by organisations will be used to develop new policy solutions that support organisations in cyber risk management.

However, responses are not limited to organisations and all those that have an interest in supply chain cyber risk management are being asked to provide their opinions.

Security comes first

The Government wants to ensure that organisations can properly review the cyber security risks coming from suppliers and their supply chains.

The National Cyber Security Centre (NCSC) already offers a raft of support to help organisations assess the security risks of their suppliers, however the Government wants to go further and is asking for views from organisations on this matter.

They have requested views on existing guidance for supply chain risk cyber management and they are testing a new security framework with some firms. This is a managed service provider framework, which requires Managed Service Providers to meet the current Cyber Assessment Framework so feedback can be collected.  

On the Call for Views, Digital Infrastructure Minister Matt Warman has said: “There is a long history of outsourcing of critical services. We have seen attacks such as ‘CloudHopper’ where organisations were compromised through their managed service provider. It’s essential that organisations take steps to secure their mission critical supply chains – and remember they cannot outsource risk.

“Firms should follow free government advice on offer. They must take steps to protect themselves against vulnerabilities and we need to ensure third-party kit and services are as secure as possible.”

Want to take part?

If you wish to take part in the Call for Views, you can complete the online survey. If you are unable to complete the survey, you can email your response to cyber-review@dcms.gov.uk or send it via post to the following address:

Call for views on supply chain cyber security

Cyber Resilience Team - 4/47

DCMS

100 Parliament Street

London

SW1A 2BQ

Tags: supply chain security data processing infrastructure management and supplier assurance chain cyber risk management ncsc


12 May 2021

Equivalents keep the supply chain moving in uncertain markets

pexels-photo-3520692

In uncertain markets, the demand for specific, branded components tends to outstrip supply. We have seen this recently with the semiconductor shortage, where specific chips are hard to come by at a time when they are needed.

Equivalent components, also known as equivalents in the industry, provide an immediate solution. These ‘generic’ parts can be specified when specific parts can’t be sourced and in cases where parts no longer need to be from one brand.

Successive cycles of electronic component shortages (especially in the semiconductor sector) has led to manufacturers specifying equivalents on their order sheets. Outside of sectors that have precise specifications for safety, like aerospace and biotechnology, these equivalents are helping to keep supply chains moving.

Equivalent in quality and specification

One of the common misconceptions about equivalent components is that they are somehow castoffs or second-best components. This is untrue. They are simply equivalent components from a different brand/maker/OEM.

The term ‘equivalent’ is used to describe components that can be used as substitutes for specific components. They meet the size, power, specification and design standards set by design teams. They are ‘like-for-like’ on the spec sheet.

The quality aspect of equivalents is only a concern when the electronic component distributor cannot verify the provenance of the components. At Cyclops, we only source genuine, verifiable components. We would rather expand our supplier base than source a batch of equivalents that we cannot be sure of.

A pragmatic approach to managing supply

Companies that are fixated on using specific components run the risk of running into roadblocks. There is a global shortage for chip passives and discrete semiconductors and this problem is expected to last through 2021.

Specifying equivalents is a pragmatic approach to managing supply chains in uncertain markets for several reasons. For the customer, generic specification reduces supply chain risk. It allows the customer to meet demand requirements without the risk of backorders, supply constraints, or being outbid by other companies.

The biggest benefit is flexibility. Rather than be tied to what is in stock and what you can source from an OEM, you can specify a value and chip size for passives, or a generic diode designation, and let your distributor source equivalents.

If you want to give yourself the best chance of meeting demand for scarce electronic components, equivalents will need to form part of your supply chain. Otherwise you run the risk of disruption and higher procurement costs.

How we can help you

Cyclops specialises in the procurement and delivery of electronic components and parts for a wide variety of industries from the world's leading manufacturers.

We can source equivalent components for you from our global network. All we need is a value and chip size for passives or a generic diode designation for actives. We will work with your spec sheets and source high-quality, equivalent components.

If you are currently experiencing an electronic component shortage, we can help. Email us if you have any questions or call us on 01904 415 415 for a chat with our team.

Tags: uncertain markets supply equivalent components aerospace biotechnology substitutes flexibility


28 April 2021

Electronics Counterfeiters Capitalize on Component Shortages

component checking

The electronics industry is experiencing a components shortage which is bad news for everyone except counterfeiters who are seeing greater demand than ever.

The total available market for counterfeit electronic components is billions of pounds, so it makes no wonder this illegal activity is seeing rapid growth.

What is a counterfeit part?

A counterfeit part is an unauthorised copy, imitation, substitute, or modification of an original component. Counterfeit components are a misrepresentation of the real thing but can be extremely convincing they are legitimate.

Giveaways that components are counterfeits include:

  • Colour variances
  • Misspellings and incorrect labelling
  • Mismatched date codes
  • Duplicate date codes and labels
  • Missing items
  • Poor packaging and quality control
  • Font variances
  • Country of origin problems
  • Signs of “resurfacing”
  • Failure in tests and performance issues

How are counterfeiters capitalising on component shortages?

Electronics counterfeiters are capitalising on component shortages by penetrating weakened supply chains, taking advantage of inadequate quality control processes and taking advantage of inadequate reporting.

Demand is exceeding supply for many electronic components, exasperating the issue. The semiconductor shortage is the current big one.

As lead times get pushed out, buyers are faced with a dilemma: should they stick with trusted suppliers and put up with delays or look for another supplier? The risk is the ‘other supplier’ being a counterfeiter or not having the necessary controls in place to ensure that shipments do not get intercepted and changed.

This dilemma is when counterfeiters strike to take advantage. The wrong decision can have significant financial and economic consequences.

Another area of focus for counterfeiters is the scarcity of parts caused by end-of-life designations. There is significant demand for end-of-life components, but they can be very hard to find. Counterfeiters pray on this weakness with illegitimate copies.

There’s also a grey market for used electronic components that are refurbished or reconditioned and sold as new. The danger with this is using components that are spent and not repaired properly. When you buy “new” the components should be exactly that. Buying used is never a good idea, unless you want used parts.

How can I protect myself from counterfeiters?

First of all, you should read our 8 Step Guide To Buying Electronic Components With Confidence and Avoiding Counterfeits.

Secondly, you should only work with electronic component suppliers who have a compliance program in place. A good benchmark is suppliers who are ERAI (Electronic Resellers Association International) members. We are ERAI members, so we are on the ERAI database and use ERAI supply chain risk mitigation solutions.

Secondly, it’s really important that you have adequate inspection and testing processes in place to verify the components you receive. If your supplier tests components for you, what testing facilities do they use, and which services are performed?

Summing up

Electronics counterfeiters are capitalising on component shortages by taking advantage of inadequate quality control and reporting processes and weakened supply chains.

A robust supply chain and trusted parts suppliers are the two keys to protecting your organisation. If you are concerned about counterfeit components in your supply chain we’re happy to provide advice. Call us on 01904 415 415 for a chat.

Tags: counterfeiters electronic components lead times 8 step guide to buying electronic components with confidence and avoiding counterfeits electronic component suppliers erai


Component Search

Step 1

Enter Electronic Component part number below.

Step 2

Click the button below.
It’s that easy.

Cyclops Electronics Ltd, Reg. No. SC128862, VAT No. GB561633447

Registered Office: Allan House, 25 Bothwell Street, Glasgow G2 6NL

(Registered in the United Kingdom)

© 2021 Cyclops Electronics

Website by See Green